No Music Playing
Start your musical journey by discovering amazing songs and artists
Player settings
Loading devices…
No output devices found. Use a supported browser (e.g. Chrome) for device selection.
Names may show as "Output 1", "Output 2" unless this site has microphone access.
202 vs 303
Help neededrecently I bought a little brother for my TB-303, and I synced them by using the cv/gate connetions. This works, the MC-202 plays what the 303 plays, however, if I add slides to my 303 pattern, the 202 seems to triple those notes. If I dont use slides in the 303, the 202 plays fine.
Is anyone familiar with this, or other cv/gate related issues?
grtz, Matthijs
Replies
nope, never toyed with CV stuff...
maybe this could help: http://www.synthforum.nl/forums/showthread.php?s=&postid=872416#post872416
thanx for the link, could have found it myself.... if I wasnt that lazy, or busy, or lazy and busy..
MY 202 has been modified in order to use the cv/gate inputs. The inputs had a lag, which was really obvious when using the 303 to sequence it. I used my little MCV to connect the 202, but with basically all short attack sounds, you'd hear the delay very obvious. Too obvious! Now it tracks like a charm! I made a small demo, its on youtube: http://www.youtube.com/watch?v=R7Im1E7yHIg
to use the cv inputs off your 202 you should modifie its i believe the microprocessor is the cause of a delay in the signal
The signal from the cv ins go through to microprocessor where its quantised. This will result in a delay. The modification bypasses the microprocessor and feeds the internal synth without use of the processor.
Originally posted by : ProjectGenocide
to use the cv inputs off your 202 you should modifie its i believe the microprocessor is the cause of a delay in the signal
ok, thanx for da reactions! i'm not going to spend time or money on modifying my 202, I also have a midi-CV/gate converter so I control it by my RM1X
thanx again...