Yamaha MSP5 monitor problem

That sucks...  Have you tried different electricity connections? (stekkers)

cause can be your edirol or your moni's if it's the edirol, check if the preamps aren't fuly open (can cause white noise) in case of the moni's, it could be radio-freq's interfearing inside yer moni's. can be solved by putting a high capicity condensor on the inputs or making a faraday-cage around the amp of the moni.

disconnect the jacks, if the noise is still there it s your moni's, otherwise it s someting in the chain before your moni's.is the zoomsound noise or a high freq; because my ua-25 has makes a high tone lately :(at everybody: don t buy edriro 

When I disconnect the jacks the noise is gone, It's really a zoomsound, the preamp isn't fully open and I've tried also different connections  I've called the store and they said it had something to do with "de aarding" (don't know what it is in Englinsh) of the usb port of my computer (which I think is wierd because if I plug in my headphones in the UA-25 I hear no zoomsound)  So I really don't get it and it drives my mad... @firefrog could you give e little more explanation about  "can be solved by putting a high capicity condensor on the inputs or making a faraday-cage around the amp of the moni." Because I have no idea what your talking about man:) Thnx all!! 

Originally posted by : MrNice

When I disconnect the jacks the noise is gone, It's really a zoomsound, the preamp isn't fully open and I've tried also different connections I've called the store and they said it had something to do with "de aarding" (don't know what it is in Englinsh) of the usb port of my computer (which I think is wierd because if I plug in my headphones in the UA-25 I hear no zoomsound) So I really don't get it and it drives my mad... @firefrog could you give e little more explanation about "can be solved by putting a high capicity condensor on the inputs or making a faraday-cage around the amp of the moni." Because I have no idea what your talking about man:) Thnx all!! 

aaah! i had kinda the same with my Mbox! you have to use a usb-cable that has thick round blocks on both ends. those blocks keep the hiss away from your sound. also check if the cables from your edirol to your moni's are symmetrical (3 lines in each cable) what i meant with the condensor was that sometimes your speakercables work as an antenna that captures radio-frequencies and make them audible in the speaker itself (a friend of mine had it with the behringer truth's on his attick-room in Bxxl; he heard stubru and a french radio simulteaniously when he switched them on). to solve this problem you have to put a condensor between the signal-line and the earth-line of your speakercable. but now i'm not shure if it should be a condensor with high cpacity or low capacity... (the exam is in june, so maybe i'll tell you then :p )

what condensor depends on the frequency of the radio station. the higher the freq, the lower the condensor value.

Originally posted by : strekie

what condensor depends on the frequency of the radio station. the higher the freq, the lower the condensor value. 

yeah i know, but i can't remember how high or how low that condensor should be to be out of the range of radiofreq's 

Originally posted by : firefrog > Originally posted by : strekie what condensor depends on the frequency of the radio station. the higher the freq, the lower the condensor value.   yeah i know, but i can't remember how high or how low that condensor should be to be out of the range of radiofreq's whoopsie i was wrong. the higher the c value, the lower the freqs that are sucked into the ground. use a c value of 10-100 nF, it will get rid of the radio f's and keep you audio signal. be careful not to unbalance your balanced cable that way ;) 

thnx for the advice!!